Jazz Fighter Touch Panel Firmware Upgrade for Windows 8 (32-bit) – IdeaPad Miix 10 Tablet

Supported Systems

• IdeaPad Miix 10 Tablet

Supported Operating Systems

• Windows 8 32-bit

Important Information

• BIOS, abbreviation of Basic Input/Output System, is integrated in ROM chip on main board, which contains the basic input/output program, system configuration information, system startup self-check and pre-setup programs. BIOS provides most basic low-level hardware operations; it is the connection between software and hardware, and interfacing window of hardware and operating system.
  
  Note: Make note of any settings you have changed in the BIOS Configuration Utility. These settings may have to be re-entered after updating the BIOS.
  
  Attention: Do not power off or restart your computer during the BIOS flashing process, which will cause serious damage and improper functioning of your computer.

Updated Information

      This is an automatic tool for upgrading IdeaPad Miix 10 Tablet touch panel firmware, which enables to support 10 fingers touch panel performance to optimize user experience.

Install the package in Windows

Step 1: Run “tpfw_upgrade.exe”, do not power off system during firmware upgrade!

Messaged from control window can be:

1. FW UPGRADE SUCCESS!------FW being upgraded successfully, system will be shutdown automatically;
2. ERROR!!------ unkown error;
3. TOUCH CONTROLLER IC CAN NOT BE IDENTIFIED!------ Vendor ID is not correct, touch controller IC may not be from Synaptics;
4. FW is already latest, no need to be upgraded------ No need to upgrade FW